Detonation Flame Arrester Series “Stubby”

Detonation Flame Arrester Series “Stubby”

Model Series “Stubby ” C-FH

Flame Arrester Type – In-line Bi- Directional Flame Arrester

Recommended installation/use –  Vertically or Horizontally anywhere in a Piping systems.

Design/Test Standard/Test Gas USCG 33 cfr/Propane/Ethylene/Hydrogen

Connection sizes 2” through 22” Pipe sizes (24” & 30” Special order).

Type of connection: Flanged connection.

Flange ratings Available in ASME 150# Raised Faced Flange

Housing Materials Standard Model; Carbon Steel, also available in 304, 316L & most other Austenitic metal or hastelloy.

Element Type/Material The element is crimped metal ribbon made from 304 Stainless Steel and is also available in 316L or hastelloy.

Maximum Initial pressure (Psia.) 22.7(Grp D), 20.7,(Grp C), 19.7 (Grp B)

Operating temperature range -17ºC to +60ºС

Hydrostatic Test Pressure 350 Psig.

Gas Group Application Rating NEC Group D,C, B( IEC Group IIA, IIB, IIC)

1476985101

Detonation Flame Arrester Series C

Model Series C 

Flame Arrester Type In-line Bi- Directional Flame Arrester

Recommended installation /use Vertically or Horizontally anywhere in a Piping systems.

Design/Test Standard/Test Gas USCG 33 cfr/Propane/Ethylene/Hydrogen

Connection sizes 2” through 22” Pipe sizes (24” & 30” Special order).

Type of connection Flanged connection.

Flange ratings Available in ASME 150# Raised Faced Flange

Housing Materials Standard Model; Carbon Steel, also available in 304, 316L & most other Austenitic metal or hastelloy.

Element Type/Material The element is crimped metal ribbon made from 304 Stainless Steel and is also available in 316L or hastelloy.

Maximum Initial pressure (Psia.) 22.7(Grp D), 20.7,(Grp C), 19.7 (Grp B)

Operating temperature range -17ºC to +60ºС

Hydrostatic Test Pressure 350 Psig.

Gas Group Application Rating NEC Group D,C, B( IEC Group IIA, IIB, IIC)

detonation_flame_arrester_standard_web_catalog_rev2

Deflagration Flame Arrester

Series B 

Flame Arrester Type In-line, Bi- Directional, High Pressure, Deflagration Flame Arrester

Recommended installation /use Vertically or Horizontally in a Piping systems with up to 60’ plus 1, 90° Elbow. (For example; a 60 foot flare stack with 90° Elbow at the base and the flame arrester immediately before the elbow).

Design/Test Standard/Test Gas Propane/Tested to API-2028 Sect 5 paragraph b.

Connection sizes 2” through 12” Pipe sizes.

Type of connection Flanged connection.

Flange ratings Available in ASME 150# Raised Faced Flange

Housing Materials Standard Model; Carbon Steel, also available in 304, 316L & most other Austenitic metal or hastelloy.

Element Type/Material The element is crimped metal ribbon made from 304 Stainless Steel and is also available in 316L or hastelloy.

Maximum Initial pressure Initial Pressure 19.7 Pisa.

Operating temperature range -17ºC to +60ºС or (1024ºС for 5 minutes Stabilized Burn Condition, Type I USCG rating)

Hydrostatic Test Pressure 350 Psig.

Gas Group Application Rating NEC Group D,( IEC Group IIA)

 

Deflagration Flame Arrestor